Since problem is very similar to xbox's RROD the fix fundamental is similar: add pressure to GPU and CPU. I tried various things(shim etc.) before I figured out how is the fix would be. You need just 4 big washers(diameter 40mm, hole 8mm and 1mm thick. You can find these every hardware store for less than 1euro.) to do this.
What you have to do is to put them on the screws which holds holds the cooler blocks in place.
Just screw screws as tight you can get them with reasonable force. You can't screw them too tight because of type of the screws. You have to cut out small piece of one washer(lower right one in photo) due metal clip used for attaching PSU and memory card reader. Dremel or something similar is good for that. Because of washers thickness it adds some pressure and because washers size it produces pressure from larger area.
Adding these washers have been enough for all PS3s I have come across. I'm sorry I don't have any photos of washers assembled since I don't have any unit under repair right now and I have lost my older photos regarding my repair method...
Δεν υπάρχουν σχόλια:
Δημοσίευση σχολίου